Skip to content

Folder

In this section we will have a closer look at how you can use Folder screen to control the system during the CPT operation in Manual Mode.

Choose the Folder icon in the navigation bar for navigation:

Navigate to Folder screen

Controls

We will have a look at a brief description of the controls, their responsibilities and also how it reflects on the Visualization screen.

Push and Pull

Are responsible for starting rotating the Folder in push and pull modes.

The buttons:

Push and Pull buttons

An example of the Visualization screen after Push button is pressed. We can see the values changed in the Folder section:

Push button pressed

Visualization screen

Tap on the Controlled Stop button to stop the process.

State Number

Opens a modal where an operator can set the State Number.

The button:

State Number button

An example of the Visualization screen after changing the value for State Number to 4. We can see the State Number value changed:

State Number modal

State Number changed on a Visualization screen

Folder Follow Mode

Tap to switch between ST-Tension and Sprocket modes.

The switcher:

Folder Follow Mode switcher

An example of the Visualization screen after Follow Mode switched to Sprocket. We can see the Follow Mode has changed:

Folder Follow Mode switcher action

Folder Mode changed on a Visualization screen

What's next?

Feel free to go to the next section and learn the SHPU controls in more detail: SHPU overview